National Safety Apparel is a leading provider of flame resistant clothing, including bib overalls. Arc flash bib overalls from NSA include pass through pockets and traditional pockets and hook and loop fly and boot closures. These great bibs are made in the USA and are available in sizes SM – 3X with inseams of 30” or 32”.  Ensure a great fit using the sizing chart below for all C54 bib overalls.

Garments are not preshrunk, please allow for average 5% shrinkage on these garments.

Notes for a successful fit in the chest area from FRSafety.com:

• Take your chest measurement around the fullest part of the chest with arms down: just under the arms and across the shoulder blades.
• Take your chest measurement while wearing the outfit that you would wear when donning coveralls. If you will wear a sweatshirt beneath your flame resistant coveralls, be sure to measure your chest while wearing it.  Be sure to consider what clothes will be worn in the coldest of climates.
• If your waist, mid-section or hip area is larger than your chest, measure at your widest point to ensure a proper fit. If your chest measures at 36”, but your mid-section measures at 42”, be sure to order the larger size.
• For a roomy coverall fit, order coveralls a size larger than your chest measurement.

LENGTH

Notes for a successful fit in the garment length:

·         Measure from crotch to top of foot, along inside of leg. Typically, normal pant inseam length is the right length.

• If you are not sure if you are a 30” or 32” or any length, order longer. It is much easier to “hem” or shorten any garment than to make it longer. Often times lengthening a garment requires the addition of fabric.

Please note that different manufacturers size their garments based on varying measurements. For correct ordering, it is absolutely necessary that you use the correct size chart. This sizing chart applies to all C54 FR bib overalls or arc flash kits that include the C54 bib overalls by National Safety Apparel.